tcl/target: add SPDX tag

[fw/openocd] / tcl / target / samsung_s3c2410.cfg

diff --git a/tcl/target/samsung_s3c2410.cfg b/tcl/target/samsung_s3c2410.cfg
index 3c0768bca705f451eb135278e6cf98a6e19bdbbd..5a04871f269a783e7ba90256ca3ab7b0256c264a 100644 (file)
--- a/tcl/target/samsung_s3c2410.cfg
+++ b/tcl/target/samsung_s3c2410.cfg
@@ -1,22 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Found on the 'TinCanTools' Hammer board.
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME s3c2410
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME s3c2410
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
   # This config file was defaulting to big endian..
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID] } {        
-   set  _CPUTAPID $CPUTAPID    
-} else {        
-   set  _CPUTAPID 0xffffffff
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   # Force an error until we get a good number.
+   set _CPUTAPID 0xffffffff
 }
 
 #use combined on interfaces or targets that cannot set TRST/SRST separately
@@ -25,10 +28,10 @@ reset_config trst_and_srst
 #jtag scan chain
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
 
 # speed up memory downloads
 arm7_9 fast_memory_access enable