flash: fix at91sam3/4 driver typos

[fw/openocd] / tcl / target / pic32mx.cfg

diff --git a/tcl/target/pic32mx.cfg b/tcl/target/pic32mx.cfg
index d77c3a8c9ae95bce54324e1355909a6a9ded5563..598c905cf49e4fdde71b3f9d70e0b2ceb6217247 100644 (file)
--- a/tcl/target/pic32mx.cfg
+++ b/tcl/target/pic32mx.cfg
@@ -1,37 +1,31 @@
-
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME pic32mx
+   set _CHIPNAME pic32mx
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
    set _CPUTAPID 0x30938053
 }
 
 # default working area is 16384
 if { [info exists WORKAREASIZE] } {
-   set  _WORKAREASIZE $WORKAREASIZE
+   set _WORKAREASIZE $WORKAREASIZE
 } else {
-   set  _WORKAREASIZE 0x4000
+   set _WORKAREASIZE 0x4000
 }
 
-
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only
-
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
@@ -46,7 +40,7 @@ target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_TARGETNAM
 #
 
 global _PIC32MX_DATASIZE
-global _PIC32MX_PROGSIZE
+global _WORKAREASIZE
 set _PIC32MX_DATASIZE 0x800
 set _PIC32MX_PROGSIZE [expr ($_WORKAREASIZE - $_PIC32MX_DATASIZE)]
 
@@ -58,22 +52,26 @@ $_TARGETNAME configure -event reset-init {
        #
 
        global _PIC32MX_DATASIZE
-       global _PIC32MX_PROGSIZE
+       global _WORKAREASIZE
 
        # BMXCON
        mww 0xbf882000 0x001f0040
-       # BMXDKPBA: 2k kernel data @ 0xa0000800
+       # BMXDKPBA: 2k kernel data @ 0xa0000000
        mww 0xbf882010 $_PIC32MX_DATASIZE
-       # BMXDUDBA: 16k kernel program @ 0xa0000800
-       mww 0xbf882020 $_PIC32MX_PROGSIZE
-       # BMXDUPBA: 0k user program
-       mww 0xbf882030 $_PIC32MX_PROGSIZE
+       # BMXDUDBA: 14k kernel program @ 0xa0000800 - (BMXDUDBA - BMXDKPBA)
+       mww 0xbf882020 $_WORKAREASIZE
+       # BMXDUPBA: 0k user program - (BMXDUPBA - BMXDUDBA)
+       mww 0xbf882030 $_WORKAREASIZE
 }
 
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
 flash bank $_FLASHNAME pic32mx 0x1fc00000 0 0 0 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME pic32mx 0x1d000000 0 0 0 $_TARGETNAME
+# add virtual banks for kseg0 and kseg1
+flash bank vbank0 virtual 0xbfc00000 0 0 0 $_TARGETNAME $_FLASHNAME
+flash bank vbank1 virtual 0x9fc00000 0 0 0 $_TARGETNAME $_FLASHNAME
 
-# For more information about the configuration files, take a look at:
-# openocd.texi
+set _FLASHNAME $_CHIPNAME.flash1
+flash bank $_FLASHNAME pic32mx 0x1d000000 0 0 0 $_TARGETNAME
+# add virtual banks for kseg0 and kseg1
+flash bank vbank2 virtual 0xbd000000 0 0 0 $_TARGETNAME $_FLASHNAME
+flash bank vbank3 virtual 0x9d000000 0 0 0 $_TARGETNAME $_FLASHNAME