tcl/target: add SPDX tag

[fw/openocd] / tcl / target / omapl138.cfg

diff --git a/tcl/target/omapl138.cfg b/tcl/target/omapl138.cfg
index 6e06a1934ea7badccdcc4d2879886abe50b993de..2d670b98a34168cda8457243d6ea6a6cb651b113 100644 (file)
--- a/tcl/target/omapl138.cfg
+++ b/tcl/target/omapl138.cfg
@@ -1,16 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
-# Texas Instruments DaVinci family:  OMAPL138
+# Texas Instruments DaVinci family: OMAPL138
 #
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME omapl138
+   set _CHIPNAME omapl138
 }
 
 source [find target/icepick.cfg]
 
 # Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer
-if { [info exists ETB_TAPID ] } {
+if { [info exists ETB_TAPID] } {
    set _ETB_TAPID $ETB_TAPID
 } else {
    set _ETB_TAPID 0x2b900f0f
@@ -20,7 +22,7 @@ jtag configure $_CHIPNAME.etb -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 3"
 
 # Subsidiary TAP: ARM926ejs with scan chains for ARM Debug, EmbeddedICE-RT, ETM.
-if { [info exists CPU_TAPID ] } {
+if { [info exists CPU_TAPID] } {
    set _CPU_TAPID $CPU_TAPID
 } else {
    set _CPU_TAPID 0x07926001
@@ -30,12 +32,12 @@ jtag configure $_CHIPNAME.arm -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 2"
 
 # Primary TAP: ICEpick-C (JTAG route controller) and boundary scan
-if { [info exists JRC_TAPID ] } {
+if { [info exists JRC_TAPID] } {
    set _JRC_TAPID $JRC_TAPID
 } else {
    set _JRC_TAPID 0x0b7d102f
 }
-jtag newtap $_CHIPNAME jrc -irlen 6 -irmask 0x3f -expected-id $_JRC_TAPID
+jtag newtap $_CHIPNAME jrc -irlen 6 -irmask 0x3f -expected-id $_JRC_TAPID -ignore-version
 
 jtag configure $_CHIPNAME.jrc -event setup \
        "jtag tapenable $_CHIPNAME.etb; jtag tapenable $_CHIPNAME.arm"
@@ -52,8 +54,8 @@ $_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 0x2000
 # be absolutely certain the JTAG clock will work with the worst-case
 # CLKIN = 20 MHz (best case: 30 MHz) even when no bootloader turns
 # on the PLL and starts using it.  OK to speed up after clock setup.
-jtag_rclk 1500
-$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 }
+adapter speed 1500
+$_TARGETNAME configure -event "reset-start" { adapter speed 1500 }
 
 arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable