flash/nor/at91samd: Use 32-bit register writes for ST-Link compat

[fw/openocd] / tcl / target / omap5912.cfg

diff --git a/tcl/target/omap5912.cfg b/tcl/target/omap5912.cfg
index 6abbd3fae1e88fe9296d1d25b9f0541581cc5436..783f460f9a9a218fbfa975a84bf339642575b943 100644 (file)
--- a/tcl/target/omap5912.cfg
+++ b/tcl/target/omap5912.cfg
@@ -1,36 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # TI OMAP5912 dual core processor
 # http://focus.ti.com/docs/prod/folders/print/omap5912.html
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME omap5912
+   set _CHIPNAME omap5912
 }
 
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-  # this defaults to a bigendian
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    # NOTE: validated with XOMAP5912 part
    set _CPUTAPID 0x0692602f
 }
 
-# NOTE:  presumes irlen 38 is the C55x DSP, matching BSDL for
+adapter srst delay 100
+
+# NOTE: presumes irlen 38 is the C55x DSP, matching BSDL for
 # its standalone siblings (like TMS320VC5502) of the same era
 
 #jtag scan chain
-jtag newtap $_CHIPNAME dsp -irlen 38 -ircapture 0x0 -irmask 0x0 -expected-id 0x03df1d81
-jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0x0 -expected-id $_CPUTAPID
-jtag newtap $_CHIPNAME unknown -irlen 8 -ircapture  0x0 -irmask 0x0
+jtag newtap $_CHIPNAME dsp -irlen 38 -expected-id 0x03df1d81
+jtag newtap $_CHIPNAME arm -irlen 4 -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME unknown -irlen 8
 
 set _TARGETNAME $_CHIPNAME.arm
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME
 
 proc omap5912_reset {} {
        #
@@ -53,5 +50,5 @@ proc omap5912_reset {} {
 }
 
 # omap5912 lcd frame buffer as working area
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 \
+$_TARGETNAME configure -work-area-phys 0x20000000 \
        -work-area-size 0x3e800 -work-area-backup 0