Allow transports to override the selected target (hla configs unification)

[fw/openocd] / tcl / target / nrf51_stlink.tcl

diff --git a/tcl/target/nrf51_stlink.tcl b/tcl/target/nrf51_stlink.tcl
index 7bd888ec5277bdb221a79300457d715dd66a04b6..7e23c5a74438c7f18045f34a7261098516bf908d 100644 (file)
--- a/tcl/target/nrf51_stlink.tcl
+++ b/tcl/target/nrf51_stlink.tcl
@@ -1,70 +1,2 @@
-#
-# script for Nordic nRF51 series, a CORTEX-M0 chip
-#
-
-source [find target/swj-dp.tcl]
-
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME nrf51
-}
-
-if { [info exists ENDIAN] } {
-   set _ENDIAN $ENDIAN
-} else {
-   set _ENDIAN little
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 2kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x800
-}
-
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x0bb11477
-}
-
-if { [info exists TRANSPORT] } {
-   set _TRANSPORT $TRANSPORT
-   if { $TRANSPORT == "hla_jtag" } {
-      if { [info exists CPUTAPID] == 0 } {
-         # jtag requires us to use the jtag tap id
-         set _CPUTAPID 0x3ba00477
-      }
-   }
-} else {
-   set _TRANSPORT hla_swd
-}
-
-# add deprecated transport name check
-if { $_TRANSPORT == "stlink_swd" } {
-       set _TRANSPORT "hla_swd"
-       echo "DEPRECATED! use 'hla_swd' transport not 'stlink_swd'"
-}
-
-if { $_TRANSPORT == "stlink_jtag" } {
-       set _TRANSPORT "hla_jtag"
-       echo "DEPRECATED! use 'hla_jtag' transport not 'stlink_jtag'"
-}
-# end deprecated checks
-
-transport select $_TRANSPORT
-hla newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME hla_target -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-# The chip supports standard ARM/Cortex-M0 SYSRESETREQ signal, so for
-# non-"hla" targets it would be useful to have the following in the config.
-# cortex_m reset_config sysresetreq
-
-flash bank $_CHIPNAME.flash nrf51 0x00000000 0 1 1 $_TARGETNAME
-flash bank $_CHIPNAME.uicr nrf51 0x10001000 0 1 1 $_TARGETNAME
+echo "WARNING: target/nrf51_stlink.cfg is deprecated, please switch to target/nrf51.cfg"
+source [find target/nrf51.cfg]