tcl/board: add ESP32 config for ESP USB Bridge board

[fw/openocd] / tcl / target / nrf51.cfg

diff --git a/tcl/target/nrf51.cfg b/tcl/target/nrf51.cfg
index 4f2402033b4896c050737a3f189b102f2a8fcd9c..48c2715d1003c2940221902c459f1421eed1af4d 100644 (file)
--- a/tcl/target/nrf51.cfg
+++ b/tcl/target/nrf51.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # script for Nordic nRF51 series, a Cortex-M0 chip
 #
@@ -50,7 +52,7 @@ flash bank $_CHIPNAME.uicr nrf51 0x10001000 0 1 1 $_TARGETNAME
 #  The chip should start up from internal 16Mhz RC, so setting adapter
 #  clock to 1Mhz should be OK
 #
-adapter_khz 1000
+adapter speed 1000
 
 proc enable_all_ram {} {
        # nRF51822 Product Anomaly Notice (PAN) #16 explains that not all RAM banks