board: Add NXP LS1088ARDB

[fw/openocd] / tcl / target / lpc3131.cfg

diff --git a/tcl/target/lpc3131.cfg b/tcl/target/lpc3131.cfg
index 702b40618c18bfe1a6dddac3f2d33cf2a71e3d0c..89bbf0265fda0a4a45e53165b3c951f08297a8df 100644 (file)
--- a/tcl/target/lpc3131.cfg
+++ b/tcl/target/lpc3131.cfg
@@ -22,7 +22,7 @@ if { [info exists CPUTAPID] } {
 }
 
 # Scan Tap
-# Wired to seperate STDO pin on the lpc3131, externally muxed to TDO on ea3131 module 
+# Wired to separate STDO pin on the lpc3131, externally muxed to TDO on ea3131 module
 # JTAGSEL pin must be 0 to activate, which reassigns arm tdo to a pass through.
 if { [info exists SJCTAPID] } {
    set _SJCTAPID $SJCTAPID
@@ -52,11 +52,11 @@ dict set lpc313x wdt                        0x13002400
 # Target configuration
 ##################################################################
 
-jtag_nsrst_delay 1000
+adapter srst delay 1000
 jtag_ntrst_delay 0
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME 
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME invoke-event halted