flash/nor/at91samd: Use 32-bit register writes for ST-Link compat

[fw/openocd] / tcl / target / lpc3131.cfg

diff --git a/tcl/target/lpc3131.cfg b/tcl/target/lpc3131.cfg
index 702b40618c18bfe1a6dddac3f2d33cf2a71e3d0c..09d698ac6c32aed7a993f54102d585c082ecd47f 100644 (file)
--- a/tcl/target/lpc3131.cfg
+++ b/tcl/target/lpc3131.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 ######################################
 # Target:    NXP lpc3131
 ######################################
@@ -22,7 +24,7 @@ if { [info exists CPUTAPID] } {
 }
 
 # Scan Tap
-# Wired to seperate STDO pin on the lpc3131, externally muxed to TDO on ea3131 module 
+# Wired to separate STDO pin on the lpc3131, externally muxed to TDO on ea3131 module
 # JTAGSEL pin must be 0 to activate, which reassigns arm tdo to a pass through.
 if { [info exists SJCTAPID] } {
    set _SJCTAPID $SJCTAPID
@@ -52,11 +54,11 @@ dict set lpc313x wdt                        0x13002400
 # Target configuration
 ##################################################################
 
-jtag_nsrst_delay 1000
+adapter srst delay 1000
 jtag_ntrst_delay 0
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME 
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME invoke-event halted