tcl/board: add ESP32-S3 config for ESP USB Bridge board

[fw/openocd] / tcl / target / lpc2xxx.cfg

diff --git a/tcl/target/lpc2xxx.cfg b/tcl/target/lpc2xxx.cfg
index b946d44f8226109bdbbdb55cb384912529cf638c..bc5e6009f88567471d8b9c2f6865d50f8bf132fb 100644 (file)
--- a/tcl/target/lpc2xxx.cfg
+++ b/tcl/target/lpc2xxx.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Common setup for the LPC2xxx parts
 
 # parameters:
@@ -13,10 +15,10 @@ proc setup_lpc2xxx {chip_name cputapids flash_size flash_variant workarea_size c
        reset_config trst_and_srst
 
        # reset delays
-       adapter_nsrst_delay 100
+       adapter srst delay 100
        jtag_ntrst_delay 100
 
-       adapter_khz $adapter_freq_khz
+       adapter speed $adapter_freq_khz
 
        foreach i $cputapids {
                append expected_ids "-expected-id " $i " "
@@ -24,6 +26,7 @@ proc setup_lpc2xxx {chip_name cputapids flash_size flash_variant workarea_size c
 
        eval "jtag newtap $chip_name cpu -irlen 4 -ircapture 0x1 -irmask 0xf $expected_ids"
 
+       global _TARGETNAME
        set _TARGETNAME $chip_name.cpu
        target create $_TARGETNAME arm7tdmi -chain-position $_TARGETNAME
 
@@ -39,5 +42,5 @@ proc setup_lpc2xxx {chip_name cputapids flash_size flash_variant workarea_size c
 proc init_targets {} {
        # FIX!!! read out CPUTAPID here and choose right setup. In addition to the
        # CPUTAPID some querying of the target would be required.
-       return -error "This is a generic LPC2xxx configuration file, use a specific target file." 
+       return -error "This is a generic LPC2xxx configuration file, use a specific target file."
 }