if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
+ set _CHIPNAME $CHIPNAME
} else {
- set _CHIPNAME lpc2900
+ set _CHIPNAME lpc2900
}
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x0596802B
}
-if { [info exists HAS_ETB ] } {
+if { [info exists HAS_ETB] } {
} else {
# Set default (no ETB).
- # Show a warning, because this should have been configured explicitely.
+ # Show a warning, because this should have been configured explicitly.
set HAS_ETB 0
- # TODO warning?
+ # TODO: warning?
}
-if { [info exists ETBTAPID ] } {
+if { [info exists ETBTAPID] } {
set _ETBTAPID $ETBTAPID
} else {
set _ETBTAPID 0x1B900F0F
reset_config trst_and_srst separate
# Define the _TARGETNAME
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
# Include the ETB tap controller if asked for.
# Has to be done manually for newer devices (not an "old" LPC2917/2919).
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# Create the ".cpu" target
- target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME -variant arm966e
+ target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME
# Configure ETM and ETB
etm config $_TARGETNAME 8 normal full etb
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# Create the ".cpu" target
- target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME -variant arm966e
+ target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME
}
arm7_9 dbgrq enable
arm7_9 dcc_downloads enable
# Flash bank configuration:
-# Flash: flash bank lpc2900 0 0 0 0 <target#> <flash clock (CLK_SYS_FMC) in kHz>
+# Flash: flash bank lpc2900 0 0 0 0 <target#> <flash clock (CLK_SYS_FMC) in kHz>
# Flash base address, total flash size, and number of sectors are all configured automatically.
set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME lpc2900 0 0 0 0 $_TARGETNAME $FLASH_CLOCK
+flash bank $_FLASHNAME lpc2900 0 0 0 0 $_TARGETNAME $FLASH_CLOCK