set ARM mode using explicit command rather than soft_reset_halt which has lots of...

[fw/openocd] / tcl / target / lpc2478.cfg

diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg
index 2c8fdce33b717baca87ae8d9c1757e9624327ef9..1d2058b0440afdcd12e51a05093fbcb7f32b50e6 100644 (file)
--- a/tcl/target/lpc2478.cfg
+++ b/tcl/target/lpc2478.cfg
@@ -35,7 +35,7 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s
 
 $_TARGETNAME configure -event reset-init {
        # Force target into ARM state
-       soft_reset_halt
+       armv4_5 core_state arm
        # Do not remap 0x0000-0x0020 to anything but the Flash
        mwb 0xE01FC040 0x01
 }