tcl/target/at91sam3u4e.cfg: changed case in dependent file

[fw/openocd] / tcl / target / lpc2378.cfg

diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg
index aa3fad26c4c3919b9f5f8013fb299ae94e5337ac..4e50ac5c856977fd3dbb88cff7b50e75ecb098f9 100644 (file)
--- a/tcl/target/lpc2378.cfg
+++ b/tcl/target/lpc2378.cfg
@@ -43,7 +43,8 @@ $_TARGETNAME configure -event reset-init {
 # LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.
 # After reset the chip uses its internal 4MHz RC oscillator
 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
-flash bank lpc2000 0x0 0x0007D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME lpc2000 0x0 0x0007D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum
 
 # 4MHz / 6 = 666kHz, so use 500
 jtag_khz 500