TCL scripts: collect duplicated procedures

[fw/openocd] / tcl / target / lpc2148.cfg

diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg
index e70947fe9c319b5d50d63eed72cdad838be373aa..8062cdde8e7fde662fee9a9fe6cdfd1c6f990159 100644 (file)
--- a/tcl/target/lpc2148.cfg
+++ b/tcl/target/lpc2148.cfg
@@ -9,37 +9,31 @@ if { [info exists CHIPNAME] } {
    set _CHIPNAME lpc2148
 }
 
-if { [info exists ENDIAN] } {
-   set _ENDIAN $ENDIAN
-} else {
-   set _ENDIAN little
-}
-
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x4f1f0f0f
 }
 
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
 jtag_ntrst_delay 200
 
 # NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate
 # JTAG, power-on reset is not enough, i.e. you need to perform a
 # reset before being able to talk to the LPC2148, attach is not possible.
 
-reset_config trst_and_srst srst_pulls_trst
+reset_config trst_and_srst
 
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+target create $_TARGETNAME arm7tdmi -chain-position $_TARGETNAME
 
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
 $_TARGETNAME configure -event reset-init {
        # Force target into ARM state
-       armv4_5 core_state arm
+       arm core_state arm
 
        # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
        # "User Flash Mode" where interrupt vectors are _not_ remapped,
@@ -51,5 +45,6 @@ $_TARGETNAME configure -event reset-init {
        mwb 0xE01FC040 0x01
 }
 
-# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum]
-flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 $_TARGETNAME lpc2000_v2 14765 calc_checksum