flash/nor/at91samd: Use 32-bit register writes for ST-Link compat

[fw/openocd] / tcl / target / lpc1850.cfg

diff --git a/tcl/target/lpc1850.cfg b/tcl/target/lpc1850.cfg
index 94aec38fef3b66f6699397cd79f59accc08da396..6dd1ab753810d77e25ea3e71857e1bd320f56339 100644 (file)
--- a/tcl/target/lpc1850.cfg
+++ b/tcl/target/lpc1850.cfg
@@ -1,5 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
 
-adapter_khz 500
+source [find target/swj-dp.tcl]
+
+adapter speed 500
 
 if { [info exists CHIPNAME] } {
        set _CHIPNAME $CHIPNAME
@@ -21,11 +24,14 @@ if { [info exists M3_JTAG_TAPID] } {
    set _M3_JTAG_TAPID 0x4ba00477
 }
 
-jtag newtap $_CHIPNAME m3 -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_M3_JTAG_TAPID
+swj_newdap $_CHIPNAME m3 -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_M3_JTAG_TAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.m3
 
 set _TARGETNAME $_CHIPNAME.m3
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}