OMAP2420: define reset-assert event

[fw/openocd] / tcl / target / lpc1768.cfg

diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg
index fbf7117cae7f405636225da6397f01267a9da49f..9a813f5b94ee392b084220d64770d361ed629d07 100644 (file)
--- a/tcl/target/lpc1768.cfg
+++ b/tcl/target/lpc1768.cfg
@@ -31,11 +31,11 @@ set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # LPC1768 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x10000000 -work-area-size 0x8000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size 0x8000 -work-area-backup 0
 
 $_TARGETNAME configure -event reset-init {
        # Force target into ARM state
-       armv4_5 core_state arm
+       arm core_state arm
        #do not remap 0x0000-0x0020 to anything but the flash
 #      mwb 0xE01FC040 0x01
        mwb 0xE000ED08 0x00
@@ -44,7 +44,8 @@ $_TARGETNAME configure -event reset-init {
 # LPC1768 has 512kB of user-available FLASH (bootloader is located in separate dedicated region).
 # flash bank lpc1700 <base> <size> 0 0 <target#> <variant> <cclk> [calc_checksum]
 
-flash bank lpc2000 0x0 0x80000 0 0 0 lpc1700 12000 calc_checksum
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME lpc2000 0x0 0x80000 0 0 $_TARGETNAME lpc1700 12000 calc_checksum
 
 # 4MHz / 6 = 666kHz, so use 500
 jtag_khz 500