jtag/jlink: switch to command 'adapter serial'

[fw/openocd] / tcl / target / kx.cfg

diff --git a/tcl/target/kx.cfg b/tcl/target/kx.cfg
index 73ee62a79792b25e7c5f021b89f43902f5da7613..9fda4edf4a0894c5dc25c35e3ffc9fc92174207a 100644 (file)
--- a/tcl/target/kx.cfg
+++ b/tcl/target/kx.cfg
@@ -41,7 +41,7 @@ set _FLASHNAME $_CHIPNAME.pflash
 flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
 kinetis create_banks
 
-adapter_khz 1000
+adapter speed 1000
 
 reset_config srst_nogate
 
@@ -58,9 +58,13 @@ if {[using_hla]} {
    echo " it without mass erase. Don't set write protection on the first block."
    echo "!!!!!!!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!!!!!!!"
    echo ""
-} {
+} else {
    # Detect secured MCU or boot lock-up in RESET/WDOG loop
-   $_CHIPNAME.cpu configure -event examine-start {
+   $_TARGETNAME configure -event examine-fail {
+      kinetis mdm check_security
+   }
+   # During RESET/WDOG loop the target is sometimes falsely examined
+   $_TARGETNAME configure -event examine-end {
       kinetis mdm check_security
    }
 
@@ -75,4 +79,3 @@ if {[using_hla]} {
 $_TARGETNAME configure -event reset-init {
    kinetis disable_wdog
 }
-