# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual
# specifies up to 1MHz for VLPR mode and up to 24MHz for run mode;
# Table 17 of Sub-Family Data Sheet rev4 lists 25MHz as the maximum frequency.
-adapter_khz 1000
+adapter speed 1000
reset_config srst_nogate
echo " it without mass erase. Don't set write protection on the first block."
echo "!!!!!!!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!!!!!!!"
echo ""
-} {
- # Detect secured MCU or boot lock-up in RESET/WDOG loop
- $_CHIPNAME.cpu configure -event examine-start {
+} else {
+ # Detect secured MCU
+ $_TARGETNAME configure -event examine-fail {
kinetis mdm check_security
}