tcl/target: add SPDX tag

[fw/openocd] / tcl / target / kl46.cfg

diff --git a/tcl/target/kl46.cfg b/tcl/target/kl46.cfg
index 074f26aac8465e278f05e3a98111a12139a64b91..bf6b244d87072d00bfe04dc4b0f20670ea29f626 100644 (file)
--- a/tcl/target/kl46.cfg
+++ b/tcl/target/kl46.cfg
@@ -1,50 +1,8 @@
-#
-# Freescale Kinetis KL46 devices
-#
+# SPDX-License-Identifier: GPL-2.0-or-later
 
 #
-# KL46 devices supports SWD transport only.
+# Freescale Kinetis KL46 devices
 #
-source [find target/swj-dp.tcl]
-
-if { [info exists CHIPNAME] } {
-    set _CHIPNAME $CHIPNAME
-} else {
-    set _CHIPNAME kl46
-}
-
-if { [info exists ENDIAN] } {
-    set _ENDIAN $ENDIAN
-} else {
-    set _ENDIAN little
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 4kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x1000
-}
-
-if { [info exists CPUTAPID] } {
-    set _CPUTAPID $CPUTAPID
-} else {
-    set _CPUTAPID 0x0bc11477
-}
-
-swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_CHIPNAME.cpu
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
 
-if {![using_hla]} {
-   # if srst is not fitted use SYSRESETREQ to
-   # perform a soft reset
-   cortex_m reset_config sysresetreq
-}
+set CHIPNAME kl46
+source [find target/klx.cfg]