-# MKL25Z128VLK4
-# FreeScale Cortex-M0plus with 128kB Flash and 16kB Local On-Chip SRAM
-
-if { [info exists CHIPNAME] == 0 } {
- set _CHIPNAME kl25z
-}
-
-if { [info exists CPUTAPID] == 0 } {
- set _CPUTAPID 0x0BC11477
-}
-
-if { [info exists WORKAREASIZE] == 0 } {
- set _WORKAREASIZE 0x3000
-}
-
-if { [info exists TRANSPORT] == 0 } {
- set _TRANSPORT hla_swd
-}
-
-transport select $_TRANSPORT
-
-hla newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME hla_target -chain-position $_TARGETNAME
-
-# It is important that "kinetis mdm check_security" is called for
-# 'examine-end' event and not 'eximine-start'. Calling it in 'examine-start'
-# causes "kinetis mdm check_security" to fail the first time openocd
-# calls it when it tries to connect after the CPU has been power-cycled.
-$_CHIPNAME.cpu configure -event examine-end {
- kinetis mdm check_security
-}
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-flash bank pflash kinetis 0x00000000 0x20000 0 4 $_TARGETNAME
-
-proc kl25z_enable_pll {} {
- echo "KL25Z: Enabling PLL"
- # SIM->CLKDIV1 = (uint32_t)0x00020000UL; /* Update system prescalers */
- mww 0x40048044 0x00020000
- # /* Switch to FEI Mode */
- # MCG->C1 = (uint8_t)0x06U;
- mwb 0x40064000 0x06
- # MCG->C2 = (uint8_t)0x00U;
- mwb 0x40064001 0x00
- # /* MCG->C4: DMX32=0,DRST_DRS=1 */
- # MCG->C4 = (uint8_t)((MCG->C4 & (uint8_t)~(uint8_t)0xC0U) | (uint8_t)0x20U);
- mwb 0x40064003 0x37
- #OSC0->CR = (uint8_t)0x80U;
- mwb 0x40065000 0x80
- # MCG->C5 = (uint8_t)0x00U;
- mwb 0x40064004 0x00
- # MCG->C6 = (uint8_t)0x00U;
- mwb 0x40064005 0x00
- sleep 100
-}
-
-$_TARGETNAME configure -event reset-init {
- kl25z_enable_pll
-}
-
+echo "WARNING: target/kl25z_hla.cfg is deprecated, please switch to target/kl25.cfg"
+source [find target/kl25.cfg]