Remove annoying end-of-line whitespace from tcl/* files

[fw/openocd] / tcl / target / is5114.cfg

diff --git a/tcl/target/is5114.cfg b/tcl/target/is5114.cfg
index be7727db202d8e350d54fae7e64e641b4e3975b8..8c153347360ac0e8ee8fa4839d7fd24e2108b875 100644 (file)
--- a/tcl/target/is5114.cfg
+++ b/tcl/target/is5114.cfg
@@ -2,15 +2,15 @@
 # AKA: Atmel AT76C114 - an ARM946 chip
 # ATMEL sold his product line to Insilica...
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME is5114
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
   # this defaults to a little endian
    set  _ENDIAN little
 }
@@ -29,7 +29,7 @@ reset_config trst_and_srst
 
 # Do not specify a tap id here...
 #OLD SYNTAX: jtag_device 8 0x1 0x1 0xfe
-jtag newtap $_CHIPNAME unknown1 -irlen 8 -ircapture 0x01 -irmask 1 
+jtag newtap $_CHIPNAME unknown1 -irlen 8 -ircapture 0x01 -irmask 1
 #OLD SYNTAX: jtag_device 4 0x1 0xf 0xe
 # This is the "arm946" chip.
 jtag newtap $_CHIPNAME cpu      -irlen 4 -ircapture 0x0e -irmask 0xf
@@ -37,7 +37,7 @@ jtag newtap $_CHIPNAME cpu      -irlen 4 -ircapture 0x0e -irmask 0xf
 jtag newtap $_CHIPNAME unknown2 -irlen 5 -ircapture 1 -irmask 1
 
 
-#arm946e-s and 
+#arm946e-s and
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm966e -endian $_ENDIAN  -chain-position $_TARGETNAME  -variant arm966e