# MB9BF506
# Fujitsu Cortex-M3 with 512kB Flash and 64kB RAM
+source [find target/swj-dp.tcl]
+
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
# delays on reset lines
adapter_nsrst_delay 100
-jtag_ntrst_delay 100
+if {[using_jtag]} {
+ jtag_ntrst_delay 100
+}
-# Fujitsu cortex-M3 reset configuration
+# Fujitsu Cortex-M3 reset configuration
reset_config trst_only
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
# 4MHz / 6 = 666kHz, so use 500
adapter_khz 500
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
+if {![using_hla]} {
+ # if srst is not fitted use SYSRESETREQ to
+ # perform a soft reset
+ cortex_m reset_config sysresetreq
+}