}
# delays on reset lines
-adapter_nsrst_delay 100
+adapter srst delay 100
if {[using_jtag]} {
jtag_ntrst_delay 100
}
-# Fujitsu cortex-M3 reset configuration
+# Fujitsu Cortex-M3 reset configuration
reset_config trst_only
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
-# MB9BF506 has 64kB of SRAM on its main system bus
+# MB9BF506 has 64kB of SRAM on its main system bus
$_TARGETNAME configure -work-area-phys 0x1FFF8000 -work-area-size 0x10000 -work-area-backup 0
-# MB9BF506 has 512kB internal FLASH
+# MB9BF506 has 512kB internal FLASH
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
# 4MHz / 6 = 666kHz, so use 500
-adapter_khz 500
+adapter speed 500
if {![using_hla]} {
# if srst is not fitted use SYSRESETREQ to