tcl/target: add SPDX tag

[fw/openocd] / tcl / target / epc9301.cfg

diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg
index 9eea39b5c92de5a0c36f50227d081df1af3c7457..41021d522edc8ec794ea3b945a24410c286c0279 100644 (file)
--- a/tcl/target/epc9301.cfg
+++ b/tcl/target/epc9301.cfg
@@ -1,31 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Cirrus Logic EP9301 processor on an Olimex CS-E9301 board.
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME ep9301
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME ep9301
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
-   set  _ENDIAN little
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
+   # Force an error until we get a good number.
    set _CPUTAPID 0xffffffff
 }
 
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-jtag_nsrst_delay 100
+adapter srst delay 100
 jtag_ntrst_delay 100
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-virt 0 -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1
 
 #flash configuration
 #flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
-flash bank cfi 0x60000000 0x1000000 2 2 0
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x60000000 0x1000000 2 2 $_TARGETNAME