Move TCL script files -- Step 2 of 2:

[fw/openocd] / tcl / target / epc9301.cfg

diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg
new file mode 100644 (file)
index 0000000..6dbb91b
--- /dev/null
+++ b/tcl/target/epc9301.cfg
@@ -0,0 +1,31 @@
+# Cirrus Logic EP9301 processor on an Olimex CS-E9301 board.
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME ep9301
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0xffffffff
+}
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-virt 0 -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1
+
+#flash configuration
+#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
+flash bank cfi 0x60000000 0x1000000 2 2 0