if { [info exists BSTAPID] } {
set _BSTAPID $BSTAPID
} else {
- set _BSTAPID 0x069aa62b
+ set _BSTAPID 0x069a962b
}
if { [info exists CHIPNAME] } {
flash bank $_FLASHNAME em357 0x08000000 $_FLASHSIZE 0 0 $_TARGETNAME
if { ![using_hla]} {
- cortex_m reset_config sysresetreq
+# according to errata, we need to use vectreset rather than sysresetreq to avoid lockup
+# There is a bug in the chip, which means that when using external debuggers the chip
+# may lock up in certain CPU clock modes. Affected modes are operating the CPU at
+# 24MHz derived from the 24MHz crystal, or 12MHz derived from the high frequency RC
+# oscillator. If an external debugger tool asserts SYSRESETREQ, the chip will lock up and
+# require a pin reset or power cycle.
+#
+# for details, refer to:
+# http://www.silabs.com/Support%20Documents/TechnicalDocs/EM35x-Errata.pdf
+ cortex_m reset_config vectreset
}