flash/nor/at91samd: Use 32-bit register writes for ST-Link compat

[fw/openocd] / tcl / target / dsp568013.cfg

diff --git a/tcl/target/dsp568013.cfg b/tcl/target/dsp568013.cfg
index 98110c298b6051d42747f17dde91d8adb9464bb0..5cf5c02d088c66b3fb2ed9fab0e4441b76cb786f 100644 (file)
--- a/tcl/target/dsp568013.cfg
+++ b/tcl/target/dsp568013.cfg
@@ -1,12 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Script for freescale DSP568013
 
-if { [info exists CHIPNAME] } {        
+if { [info exists CHIPNAME] } {
    set _CHIPNAME $CHIPNAME
 } else {
    set _CHIPNAME dsp568013
 }
 
-if { [info exists ENDIAN] } {  
+if { [info exists ENDIAN] } {
    set _ENDIAN $ENDIAN
 } else {
   # this defaults to a big endian
@@ -35,7 +37,7 @@ set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME dsp5680xx -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # Setup the interesting tap
-# Disable polling to be able to get idcode from core tap. If re enabled, can be re enabled, but it should be disabled to correctly unlock flash (operations requiere certain instruction to be in the IR register during reset, and polling would change this)
+# Disable polling to be able to get idcode from core tap. If re enabled, can be re enabled, but it should be disabled to correctly unlock flash (operations require certain instruction to be in the IR register during reset, and polling would change this)
 jtag configure $_CHIPNAME.chp -event setup "
      jtag tapenable $_TARGETNAME
      poll off
@@ -73,4 +75,3 @@ $_TARGETNAME configure -work-area-virt 0
 #setup flash
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME dsp5680xx_flash 0 0 2 1 $_TARGETNAME
-