target config files: Fix whitespace issues.

[fw/openocd] / tcl / target / davinci.cfg

diff --git a/tcl/target/davinci.cfg b/tcl/target/davinci.cfg
index 9e9369dc185c7c35fd16f0ec66f339b37b587df1..859a92539a0a0faef1854cbef78d8e89c56b444a 100644 (file)
--- a/tcl/target/davinci.cfg
+++ b/tcl/target/davinci.cfg
@@ -2,7 +2,7 @@
 # Utility code for DaVinci-family chips
 #
 
-# davinci_pinmux:  assigns PINMUX$reg <== $value
+# davinci_pinmux: assigns PINMUX$reg <== $value
 proc davinci_pinmux {soc reg value} {
        mww [expr [dict get $soc sysbase] + 4 * $reg] $value
 }
@@ -20,13 +20,13 @@ source [find mem_helper.tcl]
 #
 
 # PLL version 0x02: tested on dm355
-# REVISIT:  On dm6446/dm357 the PLLRST polarity is different.
+# REVISIT: On dm6446/dm357 the PLLRST polarity is different.
 proc pll_v02_setup {pll_addr mult config} {
        set pll_ctrl_addr [expr $pll_addr + 0x100]
        set pll_ctrl [mrw $pll_ctrl_addr]
 
        # 1 - clear CLKMODE (bit 8) iff using on-chip oscillator
-       # NOTE:  this assumes we should clear that bit
+       # NOTE: this assumes we should clear that bit
        set pll_ctrl [expr $pll_ctrl & ~0x0100]
        mww $pll_ctrl_addr $pll_ctrl
 
@@ -57,8 +57,8 @@ proc pll_v02_setup {pll_addr mult config} {
        set pll_ctrl [expr $pll_ctrl & ~0x0010]
        mww $pll_ctrl_addr $pll_ctrl
 
-       # 9 - optional:  write prediv, postdiv, and pllm
-       # NOTE:  for dm355 PLL1, postdiv is controlled via MISC register
+       # 9 - optional: write prediv, postdiv, and pllm
+       # NOTE: for dm355 PLL1, postdiv is controlled via MISC register
        mww [expr $pll_addr + 0x0110] [expr ($mult - 1) & 0xff]
        if { [dict exists $config prediv] } {
                set div [dict get $config prediv]
@@ -71,7 +71,7 @@ proc pll_v02_setup {pll_addr mult config} {
                mww [expr $pll_addr + 0x0128] $div
        }
 
-       # 10 - optional:  set plldiv1, plldiv2, ...
+       # 10 - optional: set plldiv1, plldiv2, ...
        # NOTE:  this assumes some registers have their just-reset values:
        #       - PLLSTAT.GOSTAT is clear when we enter
        #       - ALNCTL has everything set
@@ -162,7 +162,7 @@ proc pll_v03_setup {pll_addr mult config} {
        set pll_ctrl [expr $pll_ctrl & ~0x0008]
        mww $pll_ctrl_addr $pll_ctrl
 
-       # 9 - optional:  write prediv, postdiv, and pllm
+       # 9 - optional: write prediv, postdiv, and pllm
        mww [expr $pll_addr + 0x0110] [expr ($mult / 2) & 0x1ff]
        if { [dict exists $config prediv] } {
                set div [dict get $config prediv]
@@ -181,8 +181,8 @@ proc pll_v03_setup {pll_addr mult config} {
        mww $pll_secctrl_addr 0x00400000
        mww $pll_secctrl_addr 0x00410000
 
-       # 11 - optional:  set plldiv1, plldiv2, ...
-       # NOTE:  this assumes some registers have their just-reset values:
+       # 11 - optional: set plldiv1, plldiv2, ...
+       # NOTE: this assumes some registers have their just-reset values:
        #       - PLLSTAT.GOSTAT is clear when we enter
        set aln 0
        if { [dict exists $config div1] } {
@@ -283,7 +283,7 @@ proc pll_v03_setup {pll_addr mult config} {
        mww $pll_ctrl_addr $pll_ctrl
 }
 
-# NOTE:  dm6446 requires EMURSTIE set in MDCTL before certain
+# NOTE: dm6446 requires EMURSTIE set in MDCTL before certain
 # modules can be enabled.
 
 # prepare a non-DSP module to be enabled; finish with psc_go