Update FTDI C232HM cfg, and add two new cfgs from cable modem research

[fw/openocd] / tcl / target / at91sam4XXX.cfg

diff --git a/tcl/target/at91sam4XXX.cfg b/tcl/target/at91sam4XXX.cfg
index 1570114049adea21de211448473c888676b38f5a..ff73670403367f0d2161ffd60a7eb38217423777 100644 (file)
--- a/tcl/target/at91sam4XXX.cfg
+++ b/tcl/target/at91sam4XXX.cfg
@@ -1,5 +1,5 @@
 #
-# script for ATMEL sam4, a CORTEX-M4 chip
+# script for ATMEL sam4, a Cortex-M4 chip
 #
 
 #
@@ -35,17 +35,14 @@ if { [info exists CPUTAPID] } {
 }
 
 swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 
 # 16K is plenty, the smallest chip has this much
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
-$_TARGETNAME configure -event gdb-flash-erase-start {
-    halt
-}
-
 # JTAG speed should be <= F_CPU/6. F_CPU after reset is 4 MHz, so use F_JTAG = 0.5MHz
 #
 # Since we may be running of an RC oscilator, we crank down the speed a
@@ -60,6 +57,8 @@ if {[using_jtag]} {
  jtag_ntrst_delay 100
 }
 
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}