remove annoying $URL$ startup message

[fw/openocd] / tcl / target / at91sam3uXX.cfg

diff --git a/tcl/target/at91sam3uXX.cfg b/tcl/target/at91sam3uXX.cfg
index 37f6b8ef25903e0d06136714cb80fbb2f56f33ce..b948c64a8ad0c3b8d3a1e58cede0aff855dbcad2 100644 (file)
--- a/tcl/target/at91sam3uXX.cfg
+++ b/tcl/target/at91sam3uXX.cfg
@@ -7,15 +7,15 @@
 #  at91sam3u2c
 #  at91sam3u1c
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME sam3
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
@@ -29,18 +29,11 @@ if { [info exists CPUTAPID ] } {
 
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # 16K is plenty, the smallest chip has this much
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
-
-reset_config srst_only
-
-# GDB can use this
-gdb_memory_map enable
-# And GDB can flash the chip
-gdb_flash_program enable
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
 
 $_TARGETNAME configure -event gdb-flash-erase-start {
     halt