tcl/target: add SPDX tag

[fw/openocd] / tcl / target / at91sam3nXX.cfg

diff --git a/tcl/target/at91sam3nXX.cfg b/tcl/target/at91sam3nXX.cfg
index 32f163e320b355d6c6d02b18c37aef38972dacfb..9b20373b6fd28acba5cdfce7ef4c9fc2333e58d2 100644 (file)
--- a/tcl/target/at91sam3nXX.cfg
+++ b/tcl/target/at91sam3nXX.cfg
@@ -1,8 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
 
 #
 # Configuration for Atmel's SAM3N series
 #
 
+source [find target/swj-dp.tcl]
+
 if { [info exists CHIPNAME] } {
        set _CHIPNAME $CHIPNAME
 } else {
@@ -15,15 +18,17 @@ if { [info exists CPUTAPID] } {
        set _CPUTAPID 0x4ba00477
 }
 
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian little -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian little -dap $_CHIPNAME.dap
 
 set _FLASHNAME $_CHIPNAME.flash
 flash bank flash0 at91sam3 0x00400000 0 0 0 $_TARGETNAME
 
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
-
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}