config files: Drop incorrect comments.

[fw/openocd] / tcl / target / at91rm9200.cfg

diff --git a/tcl/target/at91rm9200.cfg b/tcl/target/at91rm9200.cfg
index 0e672ff3a63f16b5364098dd8c42a727e911f688..a9cda192a4f7dfa87c9b7102d680a7417bfa2448 100644 (file)
--- a/tcl/target/at91rm9200.cfg
+++ b/tcl/target/at91rm9200.cfg
@@ -1,17 +1,15 @@
 # Atmel AT91rm9200
 # http://atmel.com/products/at91/
 
-reset_config trst_and_srst
-
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME at91rm9200
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
@@ -39,10 +37,10 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 # Create the GDB Target.
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME 
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # AT91RM9200 has a 16K block of sram @ 0x0020.0000
-$_TARGETNAME configure -work-area-virt 0x00200000 -work-area-phys 0x00200000 \
+$_TARGETNAME configure -work-area-phys 0x00200000 \
                -work-area-size 0x4000 -work-area-backup 1
 
 # This chip has a DCC ... use it