flash/nor/at91samd: Use 32-bit register writes for ST-Link compat

[fw/openocd] / tcl / target / at91rm9200.cfg

diff --git a/tcl/target/at91rm9200.cfg b/tcl/target/at91rm9200.cfg
index e20db5206df6fb1bf3cf2c6c2b39ce5905af5c92..1bc1287c3b9ab3316eb1e9c017669a691463fd4f 100644 (file)
--- a/tcl/target/at91rm9200.cfg
+++ b/tcl/target/at91rm9200.cfg
@@ -1,21 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Atmel AT91rm9200
 # http://atmel.com/products/at91/
 
-reset_config trst_and_srst
-
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME at91rm9200
+   set _CHIPNAME at91rm9200
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x05b0203f
@@ -30,7 +30,7 @@ if { $_CPUTAPID == 0x15b0203f } {
    echo "- ERROR:                                              -"
    echo "- ERROR: In one position (0x05b0203f) it selects the  -"
    echo "- ERROR: ARM CPU, in the other position (0x1b0203f)   -"
-   echo "- ERROR: it selects boundry-scan not the ARM          -"
+   echo "- ERROR: it selects boundary-scan not the ARM         -"
    echo "- ERROR:                                              -"
    echo "-------------------------------------------------------"
 }
@@ -42,7 +42,7 @@ set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # AT91RM9200 has a 16K block of sram @ 0x0020.0000
-$_TARGETNAME configure -work-area-virt 0x00200000 -work-area-phys 0x00200000 \
+$_TARGETNAME configure -work-area-phys 0x00200000 \
                -work-area-size 0x4000 -work-area-backup 1
 
 # This chip has a DCC ... use it