}
jtag newtap $_CHIPNAME $M3_MODULE -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_M3_DAP_TAPID -disable
jtag configure $M3_NAME -event tap-enable "icepick_d_tapenable $JRC_NAME 11 0"
+dap create $M3_NAME.dap -chain-position $M3_NAME
#
# DebugSS DAP
}
jtag newtap $_CHIPNAME $DEBUGSS_MODULE -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable
jtag configure $DEBUGSS_NAME -event tap-enable "icepick_d_tapenable $JRC_NAME 12 0"
+dap create $DEBUGSS_NAME.dap -chain-position $DEBUGSS_NAME
#
# ICEpick-D (JTAG route controller)
jtag configure $JRC_NAME -event post-reset "runtest 100"
#
-# Cortex A9 target
+# Cortex-A9 target
#
-target create $_TARGETNAME cortex_a -chain-position $DEBUGSS_NAME -coreid 0 -dbgbase 0x80000000
+target create $_TARGETNAME cortex_a -dap $DEBUGSS_NAME.dap -coreid 0 -dbgbase 0x80000000
# SRAM: 256K at 0x4030.0000
proc init_platform { SDRAM_CONFIG } {
config_opp100
config_ddr3 $SDRAM_CONFIG
-
- # now that PLLs are configured, we can run JTAG at full speed
- adapter_khz 16000
}
-$_TARGETNAME configure -event reset-start { adapter_khz 1000 }
$_TARGETNAME configure -event reset-init { init_platform 0x61a013b2 }
$_TARGETNAME configure -event reset-end { disable_watchdog }