AM335x: Disable watchdog on 'reset halt'

[fw/openocd] / tcl / target / am335x.cfg

diff --git a/tcl/target/am335x.cfg b/tcl/target/am335x.cfg
index 74096151e660aa27604557e07d1c7689b4e1d101..3ca196b11977a98e52deeb91db2c016afa955213 100644 (file)
--- a/tcl/target/am335x.cfg
+++ b/tcl/target/am335x.cfg
@@ -76,3 +76,35 @@ target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap -dbgbase 0x80
 
 # SRAM: 64K at 0x4030.0000; use the first 16K
 $_TARGETNAME configure -work-area-phys 0x40300000 -work-area-size 0x4000
+
+
+# when putting the target into 'reset halt', we need to disable the watchdog as
+# it would otherwise trigger while we're in JTAG
+# FIXME: unify with target/am437x.cfg
+source [find mem_helper.tcl]
+set  WDT1_BASE_ADDR                  0x44e35000
+set  WDT1_W_PEND_WSPR                [expr       $WDT1_BASE_ADDR     +  0x0034]
+set  WDT1_WSPR                       [expr       $WDT1_BASE_ADDR     +  0x0048]
+proc disable_watchdog { } {
+       global WDT1_WSPR
+       global WDT1_W_PEND_WSPR
+       global _TARGETNAME
+
+       set curstate [$_TARGETNAME curstate]
+
+       if { [string compare $curstate halted] == 0 } {
+               set WDT_DISABLE_SEQ1    0xaaaa
+               set WDT_DISABLE_SEQ2    0x5555
+
+               mww phys $WDT1_WSPR $WDT_DISABLE_SEQ1
+
+               # Empty body to make sure this executes as fast as possible.
+               # We don't want any delays here otherwise romcode might start
+               # executing and end up changing state of certain IPs.
+               while { [expr [mrw $WDT1_W_PEND_WSPR] & 0x10] } { }
+
+               mww phys $WDT1_WSPR $WDT_DISABLE_SEQ2
+               while { [expr [mrw $WDT1_W_PEND_WSPR] & 0x10] } { }
+       }
+}
+$_TARGETNAME configure -event reset-end { disable_watchdog }