stlink: Add PID for V3 device without MSD

[fw/openocd] / tcl / target / altera_fpgasoc.cfg

diff --git a/tcl/target/altera_fpgasoc.cfg b/tcl/target/altera_fpgasoc.cfg
index 1fbc5a375a08402679e8ae8e01b9e2b99ca5f660..0fc8d6735e0dc1b69b08c099e134e5ce863f6b29 100644 (file)
--- a/tcl/target/altera_fpgasoc.cfg
+++ b/tcl/target/altera_fpgasoc.cfg
@@ -36,7 +36,7 @@ jtag newtap $_CHIPNAME.fpga tap -irlen 10 -ircapture 0x01 -irmask 0x3 -expected-
 # core 1  -  0x80112000
 
 # Slow speed to be sure it will work
-adapter_khz 1000
+adapter speed 1000
 
 set _TARGETNAME1 $_CHIPNAME.cpu.0
 set _TARGETNAME2 $_CHIPNAME.cpu.1
@@ -46,18 +46,16 @@ dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 target create $_TARGETNAME1 cortex_a -dap $_CHIPNAME.dap \
         -coreid 0 -dbgbase 0x80110000
 
-$_TARGETNAME1 configure -event reset-start { adapter_khz 1000 }
+$_TARGETNAME1 configure -event reset-start { adapter speed 1000 }
 $_TARGETNAME1 configure -event reset-assert-post "cycv_dbginit $_TARGETNAME1"
-$_TARGETNAME1 configure -event gdb-attach { halt }
 
 
 # A9 core 1
 #target create $_TARGETNAME2 cortex_a -dap $_CHIPNAME.dap \
 #        -coreid 1 -dbgbase 0x80112000
 
-#$_TARGETNAME2 configure -event reset-start { adapter_khz 1000 }
+#$_TARGETNAME2 configure -event reset-start { adapter speed 1000 }
 #$_TARGETNAME2 configure -event reset-assert-post "cycv_dbginit $_TARGETNAME2"
-#$_TARGETNAME2 configure -event gdb-attach { halt }
 
 proc cycv_dbginit {target} {
         # General Cortex-A8/A9 debug initialisation