tcl/target: replace event trace-config

[fw/openocd] / tcl / target / allwinner_v3s.cfg

diff --git a/tcl/target/allwinner_v3s.cfg b/tcl/target/allwinner_v3s.cfg
index 32fd1887293ab2842b7d60c0686ad0371a00c9cf..437bd956dff471663d5a5c9f1f234f220b1db6ed 100644 (file)
--- a/tcl/target/allwinner_v3s.cfg
+++ b/tcl/target/allwinner_v3s.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # This is the config for an Allwinner V3/V3s (sun8iw8).
 #
 # Notes:
@@ -34,7 +36,7 @@
 # 0220ms       JTAG pins switched to SD mode
 #
 # The time frame of 20ms can be not enough to init and halt the CPU. In this
-# case I would recommend to set: "adapter_khz 15000"
+# case I would recommend to set: "adapter speed 15000"
 # To get more or less precise timings, the board should provide reset pin,
 # or some bench power supply with remote function. In my case I used
 # EEZ H24005 with this command to power on and halt the target: