tcl/target: add SPDX tag

[fw/openocd] / tcl / target / aducm360.cfg

diff --git a/tcl/target/aducm360.cfg b/tcl/target/aducm360.cfg
old mode 100755 (executable)
new mode 100644 (file)
index 785c18c..5cfb483
--- a/tcl/target/aducm360.cfg
+++ b/tcl/target/aducm360.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # This file was created using as references the stm32f1x.cfg and aduc702x.cfg
 #
@@ -10,7 +12,7 @@ if { [info exists CHIPNAME] } {
    set _CHIPNAME aducm360
 }
 
-# Endianess
+# Endianness
 if { [info exists ENDIAN] } {
    set _ENDIAN $ENDIAN
 } else {
@@ -32,16 +34,17 @@ if { [info exists CPUTAPID] } {
    set _CPUTAPID 0x2ba01477
 }
 
-swd newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 # SWD/JTAG speed
-adapter_khz 1000
+adapter speed 1000
 
 ##
 ## Target configuration
 ##
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 
 # allocate the working area
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
@@ -50,6 +53,6 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME aducm360 0x00 0 0 0 $_TARGETNAME
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 
 cortex_m reset_config sysresetreq