jtag/hla, jtag/stlink: switch to command 'adapter serial'

[fw/openocd] / tcl / interface / stlink.cfg

diff --git a/tcl/interface/stlink.cfg b/tcl/interface/stlink.cfg
index 735ad5a4ec9cdb9df62a14bf7af213ea61c8b160..8ac9b579f7c1d5133195d260fdadb6718374ef53 100644 (file)
--- a/tcl/interface/stlink.cfg
+++ b/tcl/interface/stlink.cfg
@@ -3,15 +3,14 @@
 # debugger/programmer
 #
 
-interface hla
+adapter driver hla
 hla_layout stlink
 hla_device_desc "ST-LINK"
-hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753
+hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754
 
 # Optionally specify the serial number of ST-LINK/V2 usb device.  ST-LINK/V2
 # devices seem to have serial numbers with unreadable characters.  ST-LINK/V2
 # firmware version >= V2.J21.S4 recommended to avoid issues with adapter serial
 # number reset issues.
 # eg.
-#hla_serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"
-
+# adapter serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"