jtag: add esp_usb_jtag driver

[fw/openocd] / tcl / interface / stlink-dap.cfg

diff --git a/tcl/interface/stlink-dap.cfg b/tcl/interface/stlink-dap.cfg
index ac4de18f9bbb76d9388089609d39754c64f1c9f7..5c24cbdab7083e30a67234b0f2325b834c6d1a34 100644 (file)
--- a/tcl/interface/stlink-dap.cfg
+++ b/tcl/interface/stlink-dap.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # STMicroelectronics ST-LINK/V1, ST-LINK/V2, ST-LINK/V2-1, STLINK-V3 in-circuit
 # debugger/programmer
@@ -9,7 +11,7 @@
 #
 
 adapter driver st-link
-st-link vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753
+st-link vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754
 
 # transport select dapdirect_jtag
 # transport select dapdirect_swd
@@ -17,4 +19,4 @@ st-link vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0
 
 # Optionally specify the serial number of usb device
 # e.g.
-# st-link serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"
+# adapter serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"