target/cortex_m: allow setting the type of a breakpoint

[fw/openocd] / tcl / interface / raspberrypi-native.cfg

diff --git a/tcl/interface/raspberrypi-native.cfg b/tcl/interface/raspberrypi-native.cfg
index 058d80bfd842cef44ee603d3dce07d5b40803d77..c63dfdbc759979678f41d6a2893e919ece727ee2 100644 (file)
--- a/tcl/interface/raspberrypi-native.cfg
+++ b/tcl/interface/raspberrypi-native.cfg
@@ -10,6 +10,8 @@
 
 interface bcm2835gpio
 
+bcm2835gpio_peripheral_base 0x20000000
+
 # Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
 # These depend on system clock, calibrated for stock 700MHz
 # bcm2835gpio_speed SPEED_COEFF SPEED_OFFSET
@@ -19,6 +21,10 @@ bcm2835gpio_speed_coeffs 113714 28
 # Header pin numbers: 23 22 19 21
 bcm2835gpio_jtag_nums 11 25 10 9
 
+# Each of the SWD lines need a gpio number set: swclk swdio
+# Header pin numbers: 23 22
+bcm2835gpio_swd_nums 11 25
+
 # If you define trst or srst, use appropriate reset_config
 # Header pin numbers: TRST - 26, SRST - 18
 
@@ -30,4 +36,3 @@ bcm2835gpio_jtag_nums 11 25 10 9
 
 # or if you have both connected,
 # reset_config trst_and_srst srst_push_pull
-