# Do not forget the GND connection, pin 6 of the expansion header.
#
-interface bcm2835gpio
+adapter driver bcm2835gpio
+
+bcm2835gpio peripheral_base 0x20000000
# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
# These depend on system clock, calibrated for stock 700MHz
-# bcm2835gpio_speed SPEED_COEFF SPEED_OFFSET
-bcm2835gpio_speed_coeffs 113714 28
+# bcm2835gpio speed SPEED_COEFF SPEED_OFFSET
+bcm2835gpio speed_coeffs 113714 28
# Each of the JTAG lines need a gpio number set: tck tms tdi tdo
# Header pin numbers: 23 22 19 21
-bcm2835gpio_jtag_nums 11 25 10 9
+bcm2835gpio jtag_nums 11 25 10 9
+
+# Each of the SWD lines need a gpio number set: swclk swdio
+# Header pin numbers: 23 22
+bcm2835gpio swd_nums 11 25
# If you define trst or srst, use appropriate reset_config
# Header pin numbers: TRST - 26, SRST - 18
-# bcm2835gpio_trst_num 7
+# bcm2835gpio trst_num 7
# reset_config trst_only
-# bcm2835gpio_srst_num 24
+# bcm2835gpio srst_num 24
# reset_config srst_only srst_push_pull
# or if you have both connected,
# reset_config trst_and_srst srst_push_pull
-