tcl/target/eos_s3: fix variable's expansion typo

[fw/openocd] / tcl / interface / raspberrypi-native.cfg

diff --git a/tcl/interface/raspberrypi-native.cfg b/tcl/interface/raspberrypi-native.cfg
index 6b73f3541eec9d782644d17f30fd2a6b6f421675..2d0547f310d1b70f3f2b3949d77cffa6df3d70ec 100644 (file)
--- a/tcl/interface/raspberrypi-native.cfg
+++ b/tcl/interface/raspberrypi-native.cfg
@@ -8,7 +8,7 @@
 # Do not forget the GND connection, pin 6 of the expansion header.
 #
 
-interface bcm2835gpio
+adapter driver bcm2835gpio
 
 bcm2835gpio_peripheral_base 0x20000000
 
@@ -21,6 +21,10 @@ bcm2835gpio_speed_coeffs 113714 28
 # Header pin numbers: 23 22 19 21
 bcm2835gpio_jtag_nums 11 25 10 9
 
+# Each of the SWD lines need a gpio number set: swclk swdio
+# Header pin numbers: 23 22
+bcm2835gpio_swd_nums 11 25
+
 # If you define trst or srst, use appropriate reset_config
 # Header pin numbers: TRST - 26, SRST - 18
 
@@ -32,4 +36,3 @@ bcm2835gpio_jtag_nums 11 25 10 9
 
 # or if you have both connected,
 # reset_config trst_and_srst srst_push_pull
-