cfg: Add config file variants using the ftdi driver instead of ft2232

[fw/openocd] / tcl / interface / ftdi / turtelizer2-revB.cfg

diff --git a/tcl/interface/ftdi/turtelizer2-revB.cfg b/tcl/interface/ftdi/turtelizer2-revB.cfg
new file mode 100644 (file)
index 0000000..4584040
--- /dev/null
+++ b/tcl/interface/ftdi/turtelizer2-revB.cfg
@@ -0,0 +1,18 @@
+#
+# egnite Turtelizer 2 rev B (with SRST only)
+#
+# http://www.ethernut.de/en/hardware/turtelizer/index.html
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on schematics and code"
+echo "in ft2232.c. Please report your experience with this file to openocd-devel"
+echo "mailing list, so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "Turtelizer JTAG/RS232 Adapter"
+ftdi_vid_pid 0x0403 0xbdc8
+
+ftdi_layout_init 0x0008 0x0c5b
+ftdi_layout_signal nSRST -oe 0x0040
+ftdi_layout_signal LED -data 0x0c00