tcl: ngultra: add target config file

[fw/openocd] / tcl / interface / ftdi / signalyzer-lite.cfg

diff --git a/tcl/interface/ftdi/signalyzer-lite.cfg b/tcl/interface/ftdi/signalyzer-lite.cfg
index 4988a3bfd447fbb7d5cb78e0e404ee7d39ce22fb..e6c3839c98863f71376d10da3074ff3da94132f1 100644 (file)
--- a/tcl/interface/ftdi/signalyzer-lite.cfg
+++ b/tcl/interface/ftdi/signalyzer-lite.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Xverve Signalyzer LITE (DT-USB-SLITE)
 #
@@ -9,10 +11,10 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
-ftdi_device_desc "Signalyzer LITE"
-ftdi_vid_pid 0x0403 0xbca1
+adapter driver ftdi
+ftdi device_desc "Signalyzer LITE"
+ftdi vid_pid 0x0403 0xbca1
 
-ftdi_layout_init 0x0008 0x000b
-ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
-ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020
+ftdi layout_init 0x0008 0x000b
+ftdi layout_signal nTRST -data 0x0010 -oe 0x0010
+ftdi layout_signal nSRST -data 0x0020 -oe 0x0020