tcl/interface/ftdi: improve minimodule config

[fw/openocd] / tcl / interface / ftdi / minimodule.cfg

diff --git a/tcl/interface/ftdi/minimodule.cfg b/tcl/interface/ftdi/minimodule.cfg
index 57249dfc14bd6e89908f705c3bc2789800b24320..7df096d9c8d5a302aca87ec164a0b7bcad61809f 100644 (file)
--- a/tcl/interface/ftdi/minimodule.cfg
+++ b/tcl/interface/ftdi/minimodule.cfg
@@ -4,14 +4,13 @@
 # http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_FT2232H_Mini_Module.pdf
 #
 
-echo "WARNING!"
-echo "This file was not tested with real interface, it is based on code in ft2232.c."
-echo "Please report your experience with this file to openocd-devel mailing list,"
-echo "so it could be marked as working or fixed."
-
 interface ftdi
 ftdi_device_desc "FT2232H MiniModule"
 ftdi_vid_pid 0x0403 0x6010
 
-ftdi_layout_init 0x0018 0x05fb
-ftdi_layout_signal nSRST -data 0x0020
+# Every pin set as high impedance except TCK, TDI, TDO and TMS
+ftdi_layout_init 0x0008 0x000b
+
+# nSRST defined on pin CN2-13 of the MiniModule (pin ADBUS5 [AD5] on the FT2232H chip)
+# This choice is arbitrary. Use other GPIO pin if desired.
+ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020