cfg: Add config file variants using the ftdi driver instead of ft2232

[fw/openocd] / tcl / interface / ftdi / luminary-lm3s811.cfg

diff --git a/tcl/interface/ftdi/luminary-lm3s811.cfg b/tcl/interface/ftdi/luminary-lm3s811.cfg
new file mode 100644 (file)
index 0000000..232ba03
--- /dev/null
+++ b/tcl/interface/ftdi/luminary-lm3s811.cfg
@@ -0,0 +1,24 @@
+#
+# Luminary Micro Stellaris LM3S811 Evaluation Kit
+#
+# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
+#
+# NOTE:  this is only for boards *before* Rev C, which adds support
+# for SWO tracing with ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN signals.
+# The "evb_lm3s811" layout doesn't set up those signals.
+#
+# Rev C boards work more like the other Stellaris eval boards.  They
+# need to use the "luminary_icdi" layout to work correctly.
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "LM3S811 Evaluation Board"
+ftdi_vid_pid 0x0403 0xbcd9
+
+ftdi_layout_init 0x0088 0x008b
+ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020