cfg: Add config file variants using the ftdi driver instead of ft2232

[fw/openocd] / tcl / interface / ftdi / hilscher_nxhx500_re.cfg

diff --git a/tcl/interface/ftdi/hilscher_nxhx500_re.cfg b/tcl/interface/ftdi/hilscher_nxhx500_re.cfg
new file mode 100644 (file)
index 0000000..b4cada0
--- /dev/null
+++ b/tcl/interface/ftdi/hilscher_nxhx500_re.cfg
@@ -0,0 +1,18 @@
+#
+# Hilscher NXHX 500-RE
+#
+# http://de.hilscher.com/products_details_hardware.html?p_id=P_461ff2053bad1&bs=20
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_device_desc "NXHX 500-RE"
+ftdi_vid_pid 0x0640 0x0028
+
+ftdi_layout_init 0x0308 0x030b
+ftdi_layout_signal nTRST -data 0x0100
+ftdi_layout_signal nSRST -data 0x0200