tcl/target/ti_k3: Rename m3 target as sysctrl

[fw/openocd] / tcl / interface / ftdi / hilscher_nxhx500_etm.cfg

diff --git a/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg b/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg
index 3483030c6a3e4785c33aa3fb7703185456e9a1e9..8c7981561709b76d5ca6e0ff5c90a279f895e449 100644 (file)
--- a/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg
+++ b/tcl/interface/ftdi/hilscher_nxhx500_etm.cfg
@@ -9,10 +9,10 @@ echo "This file was not tested with real interface, it is based on code in ft223
 echo "Please report your experience with this file to openocd-devel mailing list,"
 echo "so it could be marked as working or fixed."
 
-interface ftdi
-ftdi_device_desc "NXHX 500-ETM"
-ftdi_vid_pid 0x0640 0x0028
+adapter driver ftdi
+ftdi device_desc "NXHX 500-ETM"
+ftdi vid_pid 0x0640 0x0028
 
-ftdi_layout_init 0x0308 0x030b
-ftdi_layout_signal nTRST -data 0x0100
-ftdi_layout_signal nSRST -data 0x0200
+ftdi layout_init 0x0308 0x030b
+ftdi layout_signal nTRST -data 0x0100
+ftdi layout_signal nSRST -data 0x0200