tcl/interface: add SPDX tag

[fw/openocd] / tcl / interface / ftdi / ft232h-module-swd.cfg

diff --git a/tcl/interface/ftdi/ft232h-module-swd.cfg b/tcl/interface/ftdi/ft232h-module-swd.cfg
index d2bd1da6199fe635139e2969522dddc37ca95b09..d09ccf16d41e1e35e115fc5acb759e4569eaede1 100644 (file)
--- a/tcl/interface/ftdi/ft232h-module-swd.cfg
+++ b/tcl/interface/ftdi/ft232h-module-swd.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # ADAFRUIT FTDI FT232H as a SWD direct connect interface
 # Any FT232H based board may work
@@ -6,29 +8,29 @@
 #
 #
 
-interface ftdi
+adapter driver ftdi
 
-ftdi_vid_pid 0x0403 0x6014
+ftdi vid_pid 0x0403 0x6014
 
 # data MSB..LSB       direction (1:out) MSB..LSB
 # 0000'0000'0011'0000 0000'0000'0011'1011
-ftdi_layout_init 0x0030 0x003b
+ftdi layout_init 0x0030 0x003b
 # 0xfff8 0xfffb
 # Those signal are only required on some platforms or may required to be
-# enabled explicitely (e.g. nrf5x chips).
-ftdi_layout_signal nSRST -data 0x0010 -oe 0x0010
-ftdi_layout_signal nTRST -data 0x0020 -oe 0x0020
+# enabled explicitly (e.g. nrf5x chips).
+ftdi layout_signal nSRST -data 0x0010 -oe 0x0010
+ftdi layout_signal nTRST -data 0x0020 -oe 0x0020
 
 # swd enable
-ftdi_layout_signal SWD_EN -data 0
+ftdi layout_signal SWD_EN -data 0
 # tri-state (configure as input) TDO/TIO when reading
-ftdi_layout_signal SWDIO_OE -data 0
+ftdi layout_signal SWDIO_OE -data 0
 
 transport select swd
 
 # re-configure TDO as tri-state
-#ftdi_layout_signal TDO -data 0x0002 -oe 0x0002
-#ftdi_layout_signal TDI -data 0x0004
+#ftdi layout_signal TDO -data 0x0002 -oe 0x0002
+#ftdi layout_signal TDI -data 0x0004
 
 # Adafruit      FT232H    JTAG       SWD
 # Name  Pin     Name      Func       Func