cfg: Add config file variants using the ftdi driver instead of ft2232

[fw/openocd] / tcl / interface / ftdi / flossjtag.cfg

diff --git a/tcl/interface/ftdi/flossjtag.cfg b/tcl/interface/ftdi/flossjtag.cfg
new file mode 100644 (file)
index 0000000..13e1f0b
--- /dev/null
+++ b/tcl/interface/ftdi/flossjtag.cfg
@@ -0,0 +1,29 @@
+#
+# FlossJTAG
+#
+# http://github.com/esden/floss-jtag
+#
+# This is the v0.3 and v1.0 Floss-JTAG compatible config file. It relies on the
+# existence of an EEPROM on Floss-JTAG containing a name. If you have several
+# Floss-JTAG adapters connected you can use the serial number to select a
+# specific device.
+#
+# If your Floss-JTAG does not have an EEPROM, or the EEPROM is empty, use the
+# flossjtag-noeeprom.cfg file.
+#
+
+echo "WARNING!"
+echo "This file was not tested with real interface, it is based on code in ft2232.c."
+echo "Please report your experience with this file to openocd-devel mailing list,"
+echo "so it could be marked as working or fixed."
+
+interface ftdi
+ftdi_vid_pid 0x0403 0x6010
+ftdi_device_desc "FLOSS-JTAG"
+#ftdi_serial "FJ000001"
+
+ftdi_layout_init 0x0008 0x180b
+ftdi_layout_signal nTRST -data 0x0010 -oe 0x0010
+ftdi_layout_signal nSRST -data 0x0040 -oe 0x0040
+ftdi_layout_signal LED -data 0x0800
+ftdi_layout_signal LED2 -data 0x1000